User's Manual

Series 4000 Maintenance and Operations Manual 7
STAR PROGRAMMER SOFTWARE
The STAR Programmer application is used along with a suitable tablet or laptop and a USB cable
(Aclara part number 070-1700) to commission an MTU after installation or to turn an MTU off
prior to storage or relocation. This section provides information on the USB communication
interface and how to interact with the MTU using this application.
USB Port
The Series 4000 MTU uses a standard USB Type B port that allows for communication with a
laptop or tablet running the STAR Programmer software.
WARNING: EXPLOSION HAZARD - BATTERIES MUST ONLY BE CHANGED IN AN AREA KNOWN TO
BE NON-HAZARDOUS
AVERTISSEMENT: RISQUE D'EXPLOSION - AFIN D’ÉVITER OUT RISQU D’EXPLOSION, S’ASURER QUE
L’EMPLACEMENT EST DÉSIGNÉ NON DANGEREUX AVANT DE CHANGER LA BATTERIE.
DRAFT