User's Manual

Table Of Contents

MTU Instruction

for Landis & Gyr Focus Electric Meters

Purpose & Scope

This instruction provides a procedure for installing a STAR Type 10152 MTU in a Landis &

Gyr Focus Family Electric Meter.

Note: This procedure is intended for use by Landis & Gyr personnel in the manufacture

and initial assembly of these meters and is NOT intended for use in field retrofits.

Installation Procedure for Focus Family Meters

Parts Required

for MTU Installation in Focus Family Meters

• Hexagram MTU – Type 10152

• Screws (2)

• Standoffs (2)

471-2024 - 5/8/2006

Page 1

PAGE 1
MTU Instruction for Landis & Gyr Focus Electric Meters Purpose & Scope This instruction provides a procedure for installing a STAR Type 10152 MTU in a Landis & Gyr Focus Family Electric Meter. Note: This procedure is intended for use by Landis & Gyr personnel in the manufacture and initial assembly of these meters and is NOT intended for use in field retrofits.
PAGE 2
MTU Instruction for Landis & Gyr Focus Electric Meters Procedure Step 1 – Insert the two plastic standoffs into the holes provided on battery side of the Type 10152 printed circuit board assembly as shown. Step 2a – Turn the MTU over so the battery side and standoffs are facing down, and insert the MTU into the back of the Focus Meter electronics housing as shown in the photo below.
PAGE 3
MTU Instruction for Landis & Gyr Focus Electric Meters Step 4 – Connect the wiring to the meter base as required for the specific meter configuration. Two examples are shown below. Step 5 – Attach the meter cover to the base to complete the meter assembly.
PAGE 4
MTU Instruction for Landis & Gyr Focus Electric Meters The FCC wants you to know….. This equipment has been tested and complies with Part 15 and Part 90 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.