User's Manual

66 TWACS
®
-ORION
®
for UMT Products User Guide
Meter Shop Test System
HHTR-3 Times Out
If the HHTR-3 times out, verify the EMTR-3 serial number is correct. If the
number is correct, place the HHTR-3 directly in front of the EMTR-3 to guarantee
a clear communication path, and try again. If the HHTR-3 continues to time out
after trying this, RF traffic may be exceptionally heavy, and the density is
preventing good communication. Wait awhile and try again. If the HHTR-3
continues to time out, there may be a problem with the HHTR-3 or EMTR-3
firmware. Call DCSI Customer Care.
Meter Shop Test System
Use the Meter Shop Test System to test TWACS signaling, read select transponder
registers, zero select transponder registers, and perform various other transponder
functions on a TWACS-enabled FOCUS meter. For complete details on the Meter
Shop Test System, see the Meter Shop Test System Help (accessed by clicking the
Help button on the Meter Shop Test Tool main menu) or contact your Program
Manager or DCSI Customer Care at [e-mail] or 1-800-892-9008.
Because of the various test equipment available for use with DCSI products and
the configuration requirements/options, the Meter Shop Test System Set-Up Guide
will guide you through initial equipment selection and setup for meter/module
testing.
If you are unable to resolve a problem with the TWACS
®
-ORION
®
System, return
the meter to your integrator or DCSI. See Product Returns on page 3 for
instructions.