User's Manual

Table Of Contents

TWACS

-ORION

for UMT Products User Guide 29

Chapter 2 • Functional Description

6. When the list first displays, the cursor highlights the first item on the list.

Press the down arrow key to move the cursor through the list. For more

information, see Listening list & port list column headings and list item

values on page 25.

OTE

When you reach the third list item, you can push the down arrow again to view

any items below it, but the cursor stays at the bottom of the display while the

entire display shifts down.

Port List Installation Setup

When you press the Enter key on an empty port (no IED serial number for the

selected port) in the Port List, the installation process begins. The Select IED S/N

screen allows you to manually enter the desired IED serial number for installation.

If that serial number is already located on another port, the Duplicate Detected

Error screen displays. If the serial number is not already located on another port,

you will be prompted to select a service type.

Use the following procedure to install an IED using Manage Port List.

1. Follow the steps in Manage Port List on page 28 to view the Port List.

2. Press Enter on an empty port to view the Select IED S/N screen.

IED xx/xx P SR

Empty X

EMTR: ssssssssss

Enter Serial Number

IED S/N__________

Enter to Accept