User's Manual

Universal Metering Transponder for kV2c™ Meter User Guide 43
Chapter 4 • Specifications
Physical Specifications
Table 4.4 Physical specifications
Parameter Specification
Size, weight, form factor
Integrated dimensions 6.94 in. dia. x 8.2 in. lng. - Refer to General
Electric specifications for kV2c meter
Integrated weight kV2c meter w/ plastic cover 2 lbs.
Integrated kV2c w/plastic cover 3.5 lbs.
Meter forms See Table 2.8, “Model number, class, meter
form, voltage, service type, and energy”.
Installation instructions Installation instructions can be downloaded from
the DCSI Web portal (https://portal.twacs.com).
Meter socket ANSI C12.7-1987
Compliance Testing Specifications
Mechanical tests
• Mechanical Shock
• Mechanical Vibration
• Transportation Drop Test
• Transportation Vibration
Per relevant sections of ANSI C12.1 - 2001
described below:
• Test #32, per IEC 60068 part 2-27
• Test #34, per IEC 60068 part 2-6
• Test #33, per ISTA Test Procedure 1A
• Test #35, per ISTA Test Procedure 1A
Labeling Requirements, Faceplate and
Serial Number
All models
Labeling per ANSI C12.10-1987 and/or
customer specifications for:
•TWACS logo
• Model number
• Model number barcode
• TWACS serial number
• TWACS serial number barcode
The TWACS Serial Number is embedded
in the utility's meter number. It must be a
distinguishable field of the meter number,
or may be duplicated elsewhere on the
faceplate. The serialized electronics and
faceplate must be kept together.