User's Manual

32 Universal Metering Transponder for kV2c™ Meter User Guide
TWACS Installation
Verification of Equipment
Avoid damaging the equipment by verifying that the meter, defined by the
nameplate, is compatible with the field socket wiring. Refer to the supported field
installation wiring diagrams in the UMT-C-KV Field Installation Instructions
located on the TWACS portal.
Verify that the meter nameplate has the correct form number, class number, and
voltage. Refer to Figure 2.5 for approximate location of this information on the
meter label.
Figure 2.5 Meter nameplate
N OTE Refer to Table 2.8 for information on the form, class, voltage, and Kh.
Installation Procedure
Refer to the appropriate manufacturer meter installation documentation and your
company procedures for the proper safe installation of electric utility meters. For
specific installation instructions, refer to the UMT-C-KV Field Installation
Instructions located on the TWACS portal.
WARNING: When the meter is firmly seated in the base socket, the
conductors in the meter socket are energized.
Class KhFormVoltage