User's Manual

22 Universal Metering Transponder for kV2c™ Meter User Guide
Functional Description of the UMT-C-KV
Energy and Demand Measurement
The UMT-C-KV can read the appropriate mapped registers of the kV2c meter on
a scheduled basis and then store those readings in registers in its own memory.
N OTE Some features and capabilities of the transponder may not be supported, or may
be only partially supported by some versions of master station software.
Total Consumption Present
The UMT-C-KV provides Total Consumption data by reading the applicable
registers from the kV2c meter. These registers must be mapped by Meter Map
Register 1, 3, and 4.
Table 2.6 Meter Map and Meter Data Registers
Register Name
Reg ID
Dec
Reg
Length/#
Bytes
Access
Default
Value
Units Status
Meter Map Register #1-kWh 290.2 4 RW AMI Tbl/Off E
Meter Map Register #2-Unassigned 291.2 4 RW AMI Tbl/Off E
Meter Map Register #3-Forward 292.2 4 RW AMI Tbl/Off E
Meter Map Register #4-Reverse 293.2 4 RW AMI Tbl/Off E
Meter Map Register #5-Voltage A 294.2 4 RW AMI Tbl/Off E
Meter Map Register #6-Voltage B 295.2 4 RW AMI Tbl/Off E
Meter Map Register #7-Voltage C 296.2 4 RW AMI Tbl/Off E
Meter Map Registers #8-#16 -
Unassigned
297.2-
305.2
4 RW AMI Tbl/Off E
Meter Map Registers #17-#32 -
Unassigned
1800.0-
1815.0
4 RW AMI Tbl/Off N
Meter Data Register #1-kWh 306.0 8 RV 0 AMI E
Meter Data Register #2-Unassigned 307.0 8 RV 0 AMI E
Meter Data Register #3-Forward 308.0 8 RV 0 AMI E
Meter Data Register #4-Reverse 309.0 8 RV 0 AMI E
Meter Data Register #5-Voltage A 310.0 8 RV 0 AMI E
Meter Data Register #6-Voltage B 311.0 8 RV 0 AMI E
Meter Data Register #7-Voltage C 312.0 8 RV 0 AMI E
Meter Data Registers #8-#16 -
Unassigned
313.0-
321.0
8RV0AMIE
Meter Data Registers #17-#32 -
Unassigned
1816.1-
1831.1
8RV0AMIN