User's Manual

28 TWACS
®
- ORION
®
for CENTRON
®
Meter User Guide
Troubleshooting Scenarios
3. Turn the power switch to the ON position. The initial screen
appears, displaying the version of firmware, date, time, line voltage,
and the frequency of the line voltage:
Figure 2.1 RTS initial screen
4.
Press the Cont button on the RTS to display the RTS Main Menu.
The Main Menu screen appears:
Figure 2.2 RTS main menu
5.
Press 1 for communications setup. This action brings up the RTS
Transponder Menu.
Figure 2.3 RTS transponder menu
6.
Press on the Scroll Down button to select the type of remote
communication. Scroll down to find the screen that reads
“Electronic Meter Transponder (EMT)” and press Enter.
7. At the ENTER SERIAL NUMBER prompt on the next screen, input
the TWACS serial number of the unit (see picture below to locate
serial number) to be tested (press
DEL to correct errors) and press
Enter.