User's Manual

TWACS
®
- ORION
®
for CENTRON
®
Meter User Guide 17
Installation and Operation
The Success! screen displays, indicating that the ORION has been
successfully removed from the Remt List table stored in the EMTR.
11. Press the Esc button twice to return to the Main Menu screen.
Replace the EMTR
This procedure downloads the Remt List from the existing EMTR to the
HHTR so the Remt List can be uploaded to the replacement EMTR.
Two important conditions apply to this procedure:
1. The existing EMTR must be able to communicate with the ORION for
the Remt List to be downloaded to the HHTR, to simplify reinstalling
applicable ORIONs.
N OTE If communication is not possible, this procedure can not be performed.
Replace the existing meter according to your utility procedures, and
perform
Install the ORION (Linking the ORION and EMTR) on page 13 to
install the individual ORIONs.
2. This procedure requires the physical removal of the existing installed
meter and installation of a replacement meter/EMTR combination.
Perform the following procedure to replace an EMTR.
If you pressed the HHTR On/Off button at the end of any previous procedure,
begin with step 1.
-OR-
If you pressed the Esc button, begin with step 2.
1. Press the On/Off button on the HHTR.
Press the down arrow button to position the cursor in front of the
REMOTE option.
EMTR: Delete Orion
Success!
Main Menu
Order
Serial Com
REMOTE
EMTR
TWACS
HHTR Config