User's Manual

12 TWACS
®
- ORION
®
for CENTRON
®
Meter User Guide
RF Hardware Installation
ORION Equipment Installation
Follow the Badger Meter, Inc.equipment installation instructions to install
the ORION transmitter.
Installers must install the ORION equipment in accordance with all
National and Local Code provisions.
Installing a Replacement EMTR Module
This procedure is the same as installing a new EMTR-equipped meter
except that previous usage data must be retrieved and ORION/EMTR
linkage information must be reassigned to the replacement EMTR.
1. Refer to Installing a New EMTR Module on page 11 for installation
instructions.
2. Refer to Install the ORION (Linking the ORION and EMTR) on page
13 for linkage assignment instructions.
Refer to the TNS End User Guide for data retrieval instructions
ORION Equipment Replacement
Follow the Badger Meter, Inc.equipment instructions to remove and
replace an existing ORION transmitter.
Installers must perform these procedures in accordance with all
National and Local Code provisions.