User's Manual

Home Area Network Guide 21
S PECIFICATIONS
The HAN module was designed in accordance with the IEEE 802.15.4 protocol.
This section contains general, electrical, environmental, and physical
specifications for the HAN module.
Electrical Specifications
Compliance Specifications
N OTE Unless otherwise indicated, ANSI C12.1-2001 is the referring standard for tests
listed in tables Table 5.2, Table 5.3, and Table 5.4.
N OTE Per Measurement Canada, Specifications/Standards LMG-EG-07 & PS-E-09-E
are used to verify compliance with Canadian criteria.
Table 5.1 HAN module electrical ratings
Parameter Rating
Input Voltage 11 to 17 VDC
Quiescent Current <
15 mA @ 13 VDC
Current while transmitting RF <30 mA @ 13 VDC
Power Supply DC energy is provided by the host.
Table 5.2 HAN module compliance specifications
Test Title Applicable Specification
EMI/RFI Emission
Conducted/Radiated
ANSI C12.1 Test No. 27 - CFR 47 Subparts A & B -
Radio Frequency Conducted and Radiated
Emissions. Class B Digital Device. Tested to
EN55022 in order to meet both Canadian and US
requirements.
EMI/RFI Susceptibility ANSI C12.1 Test No. 26 - "Effect of Radio
Frequency Interference", 200 kHz - 10 GHz at field
strength of 15V/m.
Occupied Bandwidth 75 MHz
RF Output Power <
+22 dBm
Carrier Frequency Stability ±98 kHz-40 ppm
This product complies with FCC OET Bulletin 65 radiation exposure limits set
forth for an uncontrolled environment.