User's Manual

HAN ZigBee™ Module 3
S PECIFICATIONS
The HAN ZigBee
®
Module was designed in accordance with the IEEE 802.15.4
protocol. This section contains general, electrical, environmental, and physical
specifications for the HAN ZigBee Module.
Electrical Specifications
Compliance Specifications
N OTE Unless otherwise indicated, ANSI C12.1-2001 is the referring standard for tests
listed in tables Table 1.2, Table 1.3, and Table 1.4.
N OTE Per Measurement Canada, Specifications/Standards LMG-EG-07 & PS-E-09-E
are used to verify compliance with Canadian criteria.
Environmental Specifications
Table 1.1 HAN ZigBee Module Electrical ratings
Parameter Rating
Input Voltage 3.3 - 5V DC
Quiescent Power <
50 mW
Current while transmitting RF 210 mA
Power Supply DC energy is provided by the host.
Table 1.2 HAN ZigBee Module Compliance specifications
Test Title Applicable Specification
EMI/RFI Emission
Conducted/Radiated
CFR 47 Part 15, Class B. (See also ANSI C63.4).
Test No. 27
Effect of External Magnetic Field Test No. 18
Occupied Bandwidth 2 MHz
RF Output Power 100 mW, +20 dBm or less. Meets FCC section
15.247 for field strength of emissions.
Carrier Frequency Stability Carrier frequency is crystal controlled. Accuracy is ±
40 ppm or about ± 98 kHz.
Table 1.3 HAN ZigBee Module Environmental specifications
Thermal
Effect of Operating Temperature
Test No. 30 (-40°C - + 70°C)
Humidity
Effect of Relative Humidity
Test No. 31 (60°C, 95% non-condensing)