User manual

4. FUNCTION OF PANEL COMPONENTS
MIX
IN
GATE IN
AUX
3+4
1+2
2
ALL
4
2
4
1
3
GATE MIX
1
3
① "CH1~4" knob
Adjust the Inputs for 4 audio signals, attenuated by potentiometers for every
channel .
② "GATE IN" switch
All input channels can be individually switched on / off by switches or positive
GATE · CV signals. In addition, logic can be reversed, such as channel on with a
positive CV signal and channel off with a positive CV signal on the other hand.
③ "GATE IN" jacks
Input the CV signal for turning on / off each channel.
④ "IN" jacks
Input jacks for audio signals.
⑤ "AUX" input jack
Enter the AUX audio. It is unity gain connected to SUM output. (unity gain
=Signal should be output at the same level as input with 1: 1.)
⑥ "1&2" output jack
Output for channels 1 and 2.
⑦ "3&4" output jack
Output for channels 3 and 4.
2
3
4
5
6 7 8
1
FIG.2
：
Front Panel
6