Owner's Manual
05
ON/OFF
Turns the unit on or off.
MODE
TIMER
Intelligent eye function
HUMIDITY
LED
Turbo
ECO/GEAR
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT FAN
FAN SPEED
SWING
Model:
Increases temperate in
0.5°C (1°F) increments.
Max. temperature is
30°C (86°F).
NOTE: Press together &
buttons at the same time
for 3 seconds will alternate
the temperature display
between the °C & °F.
TEMP
TEMP
RG10P(G2HS)/BGEF and RG10P(G2HS)/BGEFU1(Fresh feature is not available)
RG10P1(G2HS)/BGEF,RG10P1(G2HS)/BGEFU1
Used to select wind flow follow
people feature or wind flow away
from people feature.
Decreases temperature
in 0.5 C(1 F) increments.
O
O
Min. temperature is
O O
16 C(60 F).
Turns indoor unit’s LED display
and air conditioner buzzer on
and off, which create a comfortable
and quiet environment.
Adjust the room humidity during
Dry operation in a range of
35%~85%. Press this button to
increase the humidity in 5%
increments.
NOTE: After setting, the humidity
settings will display on the screen.
Set timer to turn unit on or off
OK
Used to confirm the selected functions.
Press this button to enter the
energy efficient mode in a
sequence of following:
ECO GEAR(75%)
GEAR(50%)
mode ECO
......
Selects fan speeds in the
following order:
AU
20%
60% 40% 80% 100%.
Press the TEMP or button
to increase/decrease the fan
speed in 1% increments.
Enables unit to reach preset
temperature in shortest possible time.
Previous setting
SET
Scrolls through operation
functions as follows:
Fresh( )
Sleep( )
Follow
AP mode ( )
Self clean( )
Self clean.....
Me( )
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
NOTE: HEAT mode is not supported
by the cooling only appliance.