AT6SD KEYBOARD CONTROLLER Instruction manual (ref.
CONTENTS 1. Advisement ………………………………………………………. 4 2. Confirming the Contents of the Package ……………………... 6 3. Main Features and Functions …………………………………. 7 4. Appearance and Function Key ………………………………… 8 5. Functions and Operations …………………………………….
1. Advisement CAUTION WARNING Always use the unit indoors. • The unit should never be used outdoors, or in any place where it will be exposed to rain or other extremes of moisture. • Direct exposure to water will result in rust and will damage the unit. Never use in environments that have heavy concentrations of dust, smoke, steam or humidity. • Environments such as these could result in fire, electrical shock or other serious damage or injury. Never place the unit in extremes of high or low temperatures.
2. Confirming the Contents of the Package. 3. Main Features and Functions 1) Control keyboard unit 1EA. Synopsis This controller is for exclusive use for pan / tilt / zoom dome camera and speed dome camera. This is able to control a maximum of the 255 cameras, and several controllers are able to control a camera at the same time. Dome camera can set and fulfil the surveillance connected with preset, swing, group and tour.
2) Setting method of Junction box - Camera controls 1 4. Appearance and Function Key 1) Controller function button ALL Button Simultaneous on/off of cameras, lights and AUX1. (only for receiver unit) AUX (Auxiliary) Buttons These buttons are used to control of Auto-Pan (AUX1) and other unit (AUX2). (Only for receiver unit). RUN Button # Numeric Keypad (0-9) These keys are used to make input for settings and other functions.
2) Choice of camera 5. Functions and Operations Main keyboard is setup for normal products. So sub keyboard needs to be setup. (If you want to use sub keyboard, please ask to the supplier of it.) First, switch “on” of dome camera, let the keyboard supply with electricity. 1) Initial Setup of keyboard Supply the power first (put in connected power line) and then the menu screen (Figure 1-1) appears on LCD with a sound. Please wait ! Version 2.
4) Camera setup (How to enter into OSD menu) 5) Preset Point - OSD (On Screen Display) control This controller can be used to control speed dome camera, ptz dome camera with OSD menu. Please, refer also to camera OSD menu to avoid conflict in settings. The controller makes to memorise 64 sets of the individual preset position for each camera. The memorised preset point is available in resetting of power, and it can be changed.
- Swing speed (Moving speed of swing) Keypad 1-64 + ENT • Swing time: The standby time (dwell time) before starting from A or B (sec.). • Swing speed: The moving speed from A to B (1/sec.-64/sec.). - Start and stop of swing • Execution: 1(Pan)/2(Tilt) + SWING • Stop: SWING or Joystick 6) Swing This function can setup of making repetitive movement of pan or tilt swing between 2 preset point set.
- Group operation and stop • Execution: Keypad 1-6 + GROUP • Stop: GROUP or Joystick 9) Spiral Function Keypad 7 + MENU + ON/OFF This function will be supported only at speed dome camera: the fixed pan speed and tilt speed is operated at the same time that can make a spiral function. If you try to stop the group of working dome camera, press “Group” button or control joystick. Move speed: Moving speed from A to B. (64=High, 1=Low) Dwell time: Standby time before starting.
12) Brightness control of LCD 6. Maintenance and Mending Keypad 20 + MENU + Joystick up/down + CLR If the surface of the controller unit becomes dirty, turn off the power and wipe the surface with a soft, dry cloth. This function is controlling the brightness of LCD and being able to be used where there is the difference of brightness. CAUTION • 13) Alarm on / off In setting Alarm on, the camera with setting MD on can result in buzzer. When MD perceive sense, MD flickers with the sound of buzzer.
7. Connections (Junction box) 8. General Specifications 1) Controller FOR PROPER OPERATION Never install the unit yourself. • The unit should be installed by trained personnel. Item In/ Output terminal I/F between Junction box Working temperature Storage temperature Working humidity Storage humidity Dimension Weight Specification Modular jack TTL 0 °C - 40 °C -5 °C ∼ +50 °C 10-75% 10-95% 338(L) x 180(W) x 45(H) about 1.
4) Camera control interface Item Synchronization system & word lenght Signal polarity Transmit direction Transmit speed Hardware 6) Constitution of pin between controller and Junction box (modular jack) Specification Asynchronous serial interface 1 Start bit 8 Data bit No Parity 1 Stop bit 11 Byte command Mark logic “1” Space logic “0” Half duplex 9600 BPS 3 cable (twist+ground) Pin No.
9. Quick Reference Operation Function Function input Function Function input Main Main Sub [2]+[MENU]+[ON/OFF] Set motion detect ON or OFF ž ž ž ž ž [3]+[MENU]+[ON/OFF] Place of detection display ON/OFF ž [Keypad 1-255]+[CAM] Select camera Power supply ON + [SET] First stage controller setting [SET] Start set mode [SET]+[J.S Stop]+[Keypad 1-64]+[PST] [Preset No]+[PST] [CLR+3sec.
