Instruction Manual

W.E.E.E. DIRECTIVE
At the end of their useful life the packaging and product should be disposed of via a suitable recycling
centre. Do not dispose of with household waste. Do not burn.
WARRANTY
The ACI Freezer Temperature Series temperature sensors are covered by ACI’s Five (5) Year Limited Warranty,
which is located in the front of ACI’S SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s website:
www.workaci.com.
PRODUCT SPECIFICATIONS
Automation Components, Inc.
2305 Pleasant View Road | Middleton, WI 53562
Phone: [phone] | Website: workaci.com
Page 5
Version: 6.0
I0000822
SENSOR NON-SPECIFIC
Storage Temperature Range:
Operating Humidity Range:
Lead Length | Cable Diameter:
Lead Wire Insulation | Jacket Color:
Conductor Size | Conductor Material:
Probe Material | Length | Diameter:
Enclosure Specifications:
TRANSMITTER
Transmitter Supply Voltage | Supply Current:
Output Signals:
Calibrated Transmitter Accuracy | Linearity:
Transmitter Operating Temperature Range:
Operating Humidity Range:
Calibrated Temperature Spans:
Temp Drift
Warm Up Time | Drift
Connections | Wire Size
Terminal Block Torque Rating
SENSOR
Sensor Type | Sensor Curve:
DIN Standard | Temp Coefficient
Response Time
Sensor Output @ 0°C (32°F):
Sensor Tolerance Class | Accuracy:
Sensor Operating Temperature Range:
-40 to 80 °C (-40 to 176 °F)
10 to 95% RH, non-condensing
10’ (3.05 m) or 30’ (9.15 m) | 0.106” nominal (2.69 mm)
FEP/FEP (Teon) Jacketed Cable | White
24 AWG (0.51 mm) | Silver Plated Copper
316 Stainless Steel | 2” (50.8 mm) | 0.1875” (4.76 mm) nominal
“-GD”: -40 to 100 °C (-40 to 212 °F); Galvanized Steel; NEMA 1 (IP10)
“-BB”: -40 to 85 °C (-40 to 185 °F); Aluminum; NEMA 3R (IP 14)
”-4X”: -40 to 70 °C (-40 to 158 °F); Polystyrene Plastic, UL94-V2, IP66 (NEMA 4X)
+8.5 to 32 VDC (Reverse Polarity Protected) | 25 mA minimum
250 Ω Load (1-5 VDC): +13.5 to 32 VDC | 500 Ω Load (2-10 VDC): +18.5 to 32 VDC
Current: 4-20 mA (2-Wire Loop Powered) | Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
T. Spans < 260 °C (500 °F): +/- 0.2% | T. Spans > 260 °C (500 °F ): +/- 0.5%
-40 to 85 °C (-40 to 185 °F)
0 to 90%, non-condensing
Min. T. Span: 28 °C (50 °F) | Max T. Span: 426 °C (800 °F )
T. Span < 38 °C (100 °F): +/- 0.04% | T. Span > 38 °C (100 °F): +/- 0.02%
10 Minutes | +/- 0.1%
Screw Terminal Blocks | 16 AWG (1.31 mm

) to 26 AWG (0.129 mm

)
0.5 Nm nominal
Platinum RTD | Linear, PTC (Positive Temperature Coecient)
DIN EN 60751 (IEC 751) | 3850 ppm / °C
15 Seconds nominal
A/TT/TTM100-LTS Series: 100  | A/TT/TTM1K-LTS: 1 K
+/- 0.12% Class B | Class B Tolerance Formula: +/- °C = (0.30 °C + (0.005 * |t|))
-198 to 150ºC (-324 to 302ºF)