User's Manual

2. Safety
To put safety
on, press
“SAFE” button
on left side of
frame so that
red ring is not
exposed.
Always keep
safety in “SAFE”
position until
ready to shoot
(See Figure 2).
3. Loading
Press the one
inch elbow firm-
ly into marking
pistol to assure
a snug fit. (See
Figure 3).
NOTE: Loader
should be left
on pistol until
empty.
Hold marker as shown in Figure 4. Pull foregrip
backward then forward quickly (once only).
WARNING: MARKING PISTOL IS NOW
READY TO FIRE.
FIRING THE MARKER
Put safety in “fire” position, so red ring on safe-
ty button is exposed. Sight in the target, air and
pull trigger. CAUTION: Never point your
marker, charged or uncharged, loaded or
unloaded, with safety on or off, at or near any-
thing you do not intend to mark.
MAINTENANCE
1. General Care
Your ACI marker is made of corrosion resistant
materials which require no special treatment
with the exception of occasional disassembly
and cleaning. note: be sure marker is not loaded
or charged with CO
2. This may be done by
unscrewing barrel counter-clockwise and
Figure 2
NOTE RED
RING ON “FIRE”
POSITION LEFT SIDE
NOTE BUTTON IS
FLUSH ON “FIRE”
POSITION
LEFT
SIDE
Figure 3
Figure 4