User manual

Digital Video Recorder User Manual
51
STEP7 Click "OK" button to run the backup.
LOCK /UNLOCK
You could select the record which you want to lock/unlock.
STEP1 Click
button to enter the Remote Lock window, as Fig4.8 Remote Lock.
STEP2 Select the time and record type.
STEP3 Select the camera.
STEP4 Click "Select Event" button, system find the corresponding event and it will pop up the LOCK EVENT window
which is shown as Fig4.9 Lock Event.
STEP5 Select the check box can change the lock status.
Lock Status shows ‘√’ to indicate that the event is locked, otherwise it means unlock.
STEP6 Click "OK" button to confirm the operation in the Lock Event interface.
Fig4.8 Remote Lock Fig4.9 Lock Event