User manual

User Manual
32
6.3 Web Client Interface
6.3.1
Menu Bar
Menu bar include [Live], [Playback], [Remote setting], [Local Setting] and [Logout] option
6.3.1.1 Live Display
After PC Web Client logging in, system will be defaulted to enter into Live mode and connect Audio.
Also can set record manualy via shortcut key , like picture 6-2（a）and（b）
Left key ——
Click the icon of one channel to display the channel’s image
Click the icon to start manual record. save path is setup on “local setting”
Live display Key function ：
Snap screen ：clicking the button will capture the live image from one selected channel and save
the image with *.bmp format to PC.
Record ：clicking the button will remotely record the live images and automatically save the
recording to a specified position。
Channel display mode ： the icons stand for the Single channel display, Quad
display, 9-split mode, 16-split mode
Full screen ：full screen mode，click “X”in the upper right corner of screen to close
If want to play Audio, click the channel that you want.。
Volu me c o nt r ol ：clicking the icon to adjust sound volume.
PTZ Control
Reminder：refer to the picture Mark（picture 6-2（b））
PTZ direction control: the buttons allows you control PTZ moving direction. The middle is scan button
Zoom, Focus and Iris control: the buttons allows you control PTZ moving direction, zoom, focus and iris.
Preset bit control
 preset cruise control
Pan & Tilt Preset: indicates current present or input the starting point you desire to cruise firstly.
：On the Live mode, click the icon to load the last preset point you set.
：allow you set a series of specific preset points of a PTZ camera, you can setup new
preset base on last setting. But the preset number is limited.(refer to Chapter 5.5 PTZ control) . after
setup can click cruise to preview , then click to save it
：input the preset point No. you want to display and click the icon to quickly go to the
preset point on live mode.
： delete the current preset point
：enable/disable the [Cruise] function