User manual

User Manual

Mobile Viewer’s Access Instruction

The DVR is currently compatible with mobile phones running Windows Mobile, Symbian, Iphone,

Blackberry and Androids operating systems. Below are these Mobile Viewer’s installation procedures.

1、Windows Mobile ：

1) First you need to copy a program named as “Aseesetup.CAB” that is included on the CD provided by

the DVR to the mobile phone.

2) Click the program “Aseesetup” shown as Picture 1 and choose an installation location shown as

Picture 3 after the initialization.

Pic01 Pic02 Pic03

3) Click [Install] button to start the installation processing shown as Picture 2.

4) After finishing the installation, click the icon named “Asee” shown as Picture 4 to run the program.

5) Now you are allowed to enter into the program screen shown as Picture 5.

 【CH】click [Pull-down] menu to select the channel you need to monitor.

Pic05 Pic06

Pic04

 【Connect】click the button to enter into the live image of the channel you selected

 【Setup】click the button to allow you set parameter of the mobile viewer.

 Function buttons in the bottom from Left to right in turn are:：【PTZ Direction ( left, right, up, down)】；

【Area Selection（ZOOM+、ZOOM-）】；【Focus（focus +, focus-）】；【Iris（I+,I -）】；【Snapshot】.

Note: Please firstly make sure you have right PTZ parameter setting (details please refer to User

Manual-Section 5.2.6.3) on DVR, then you could control PTZ camera through your mobile phone.

The captured images will be saved to the defaulted path (ExplorerProgram FilesMoveeyePhoto file).

If you use this program first time or need to change parameter settings, please click [Setup] button to

enter into the window shown as Picture 6.

 User’s Name：herein indicate the user name which have been set on DVR-[Mobile Set] menu.

 Password: herein indicate the password which has been set on DVR-[Mobile set] menu.

 Server: indicate public IP address connected to DVR or dynamic domain name used by DVR

 Port: indicate the server port which has been set to your DVR.

 Notes: enter one channel number you want to monitor