User manual

User Manual
8
After connecting the Power cable of DVR to wall outlet and pressing th
e
Power button on the front panel, you will enter into the system initializin
g
screen shown as Picture 4-1.
Chapter 4: DVR Start up
After finishing initialization the system will enter into Live scree
n
Picture 4-2 is the 9-split display defaulted by system, which is showin
g
no video input status. Once there are video inputs, the screen wi
l
display live images from the cameras. In Live mode, if you use th
e
mouse to double-click the live image of any channel, the image will b
e
maximized to full screen, by double-clicking again, image will be com
e
back to 4-split or 9-split display mode; clicking the right button of th
e
mouse will enter into Pop-up Menu; clicking the left button of the mous
e
allows you select menu items; and clicking any area outside the men
u
allows you exit the Pop-up menu.
Picture 4-2
Picture
4.1 System Initialization
4.2 Live screen
Note: When internal HDD is not connected or an error occurs, the character “H” will appear on the first
channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter
into [Device manageAlarm setting] to set HDD loss, HDD space not enough and alarm output to “off”.
Chapter 5: DVR Menu
5.1 Pop-up Menu
Picture5-1bPicture5-1a
After finishing system initialization, click right key of mouse on Live mode to enter into Pop-up Menu.
Now you could perform parameter setting and operate on Main Menu, Multi-Pics, PTZ, PIP, Rec. Search,
Mute, Manual record, Start Rotate, Start Cruise and UI to VGA etc.
Picture5-1c
Note: options of the Pop-up menu will differ depending on different parameter setting and application
environment.