User manual
Digital Video Recorder User Manual
55
Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address
in IE address blank .i.e. set HTTP port to 82, IP address:
http://192.168.0.25, user needs to input that address:
http://192.168.0.25:82 into IE browser.
Server port: communication port
Step3: Tick off the "Obtain IP address automatically", the device will distribute IP address, subnet mask, gateway IP and
DDNS service;
Step4: enable PPPOE, user can directly connect the DVR to internet via ADSL, then input the user name and password;
click TEST button to test the effectively of relevant information.
Definitions and descriptions of network configuration:
Parameter Meaning
HTTP port The port number of accessing IE browser. The
default port is 80
Server port The port number of data. The default port is 6036
Static IP
IP address The IP address of the server
Subnet mask The subnet mask of the server
Gateway The gateway of the server
DDNS server The address of DDNS server
PPPoE
User name User name of broad band dial-up
Password Password of broad band dial-up
4.6.2 Sub stream
Step1: enter into system configurationnetwork configurationsub stream; refer to Fig 4-30: