User manual

Digital Video Recorder User Manual
49
Step3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm
handling for more details.
Step4: click Area button, a dialog box will pop-up as Fig 4-24:
Fig 4-24 motion-area
Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the
value is the higher sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its
value according to the practical conditions; click
icon, set the whole area as detection area; click icon, the set
detection area will be cleared; click
icon, user can test whether the sensitivity value and motion area are suitable
accordingly（refer to following picture）; Click icon, to save the setting; click icon, exit current interface.
Note: when user drag mouse to set motion detection area, they have to click
icon to clear all set detection