User manual

Digital Video Recorder User Manual
38
Fig 4-12 record configuration-record bit rate
Step2: setup rate, resolution, quality, encode and max bit stream
Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
Note: if the rate value set is over high the maximum resources of the device, the value will be adjusted
automatically.
Definitions and descriptions of Record stream:
Parameter Meaning
Rate
Range from: 1-30（NTSC）1-25(PAL)
Resolution
Support CIF and D1
Quality
The
q
ualit
y
of recorded ima
g
es. The hi
g
her the value is, the clea
r
er the recorded