User Manual

run insert reset Chapter 5. Tcl Command Reference
run generate netlist
run generate netlist [-outputfile <arg>] [-debugdir <arg>] [-final]
[-compress]
This command generates a verilog netlist for simulation.
Argument Required/Optional Description
[-outputfile <arg>] Optional Output netlist file name.
[-debugdir <arg>] Optional The optional -debugdir <dir>
option is used to override the
default location for debug files
during this step.
[-final] Optional Output DRC-free final netlist
[-compress] Optional Compress output file with gzip
run insert reset
run insert reset
Insert reset logic to routed design
run place
run place [-outputdir <arg>] [-reportsdir <arg>] [-debugdir <arg>]
[-gpmode <arg>] [-seed <arg>] [-timing <arg>] [-cluster <arg>]
[-structural clustering <arg>] [-verbose <arg>] [-incremental]
This command clears all routing and places the design.
Argument Required/Optional Description
[-outputdir <arg>] Optional The optional -outputdir <dir>
option is used to override the
default location for output files
during this step.
[-reportsdir <arg>] Optional The optional -reportsdir <dir>
option is used to override the
default location for report files
during this step.
[-debugdir <arg>] Optional The optional -debugdir <dir>
option is used to override the
default location for debug files
during this step.
[-gpmode <arg>] Optional Placement algorithm
(GPM,GPA).
[-seed <arg>] Optional Random seed
[-timing <arg>] Optional Use timing-driven placement
(1,0)
[-cluster <arg>] Optional Use timing-driven clustering
(1,0)
351 http://www.achronix.com UG001 Rev. 5.0 - 5th December 2012