User Manual

get part names Chapter 5. Tcl Command Reference
filter
Required The required <filter> option is
used to filter returned node names
(string patterns are matched using
Tcl string matching)
[-no case]
Optional The optional -no case option
specifies the matching of node
names to the filter should be
case-insensitive
get part names
get part names
This command returns the list of valid part names in the installed library.
get path property
get path property <id> [-pins] [-insts] [-nets] [-frequency] [-type] [-rgb]
[-text] [-slack] [-tokens]
This command returns path properties.
Argument
Required/Optional Description
<id>
Required The required <id> argument
specifies the id of the path to get
properties for.
[-pins]
Optional The optional -pins option
returns the list of pin names that
make up this path.
[-insts]
Optional The optional -insts option
returns the list of instance
names on this path.
[-nets]
Optional The optional -nets option
returns the list of net names on
this path.
[-frequency]
Optional The optional -frequency option
returns the frequency of this
path in MHz. If no frequency is
defined, -1 is returned.
[-type]
Optional The optional -type option
returns the type of path: Loop,
Reconvergent, or User-Defined.
[-rgb]
Optional The optional -rgb option returns
the integer rgb highlight color
value for the path. A value of -1
means it is not highlighted.
[-text]
Optional The optional -text option
returns the details text for this
path.
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 328