User Manual

draw oval Chapter 5. Tcl Command Reference
draw oval
draw oval <x> <y> <width> <height> [-layer <arg>] [-id <arg>] [-rgb
<args>] [-batch] [-thickness <arg>] [-fill]
This command allows you to draw a custom oval on the GUIs layout view.
Argument Required/Optional Description
<x> Required The required <x> argument
specifies the upper-left x
coordinate for the oval.
<y> Required The required <y> argument
specifies the upper-left y
coordinate for the oval.
<width> Required The required <width>
argument specifies the width of
the oval.
<height> Required The required <height>
argument specifies the height of
the oval.
[-layer <arg>] Optional The optional -layer <layer>
option specifies the drawing
layer for the oval. If this option
is not used, the top layer (5) will
be used. Using a value of 0 will
draw on the background.
[-id <arg>] Optional The optional -id <id> option
specifies a unique id for the oval.
If this option is not used, a
unique id will be automatically
generated and returned by the
command.
[-rgb <args>] Optional The optional -rgb <rgb> option
specifies the rgb color value for
the oval as a 3 element list of
integers red green blue. If this
option is not used, the color blue
will be used.
[-batch] Optional The optional -batch option
causes the GUI to not refresh
after this command. This is
useful when running many
draw commands in a row.
Afterwards, refresh drawing can
be called.
[-thickness <arg>] Optional The optional -thickness
<pixels> option specifies the
oval thickness in pixels. If this
option is not used, a thickness of
1 will be used.
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 316