User Manual

draw arc Chapter 5. Tcl Command Reference
<width> Required The required <width>
argument specifies the width of
the arc.
<height> Required The required <height>
argument specifies the height of
the arc.
<startAngle> Required The required <startAngle>
argument specifies the starting
angle of the arc.
<arcAngle> Required The required <arcAngle>
argument specifies the angle of
the arc.
[-layer <arg>] Optional The optional -layer <layer>
option specifies the drawing
layer for the arc. If this option is
not used, the top layer (5) will be
used. Using a value of 0 will
draw on the background.
[-id <arg>] Optional The optional -id <id> option
specifies a unique id for the arc.
If this option is not used, a
unique id will be automatically
generated and returned by the
command.
[-rgb <args>] Optional The optional -rgb <rgb> option
specifies the rgb color value for
the arc as a 3 element list of
integers red green blue. If this
option is not used, the color blue
will be used.
[-batch] Optional The optional -batch option
causes the GUI to not refresh
after this command. This is
useful when running many
draw commands in a row.
Afterwards, refresh drawing can
be called.
[-thickness <arg>] Optional The optional -thickness
<pixels> option specifies the arc
thickness in pixels. If this option
is not used, a thickness of 1 will
be used.
[-fill] Optional The optional -fill option specifies
whether the arc should be filled
with color or not. If this option is
not used, the arc will be hollow.
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 314