Instructions / Assembly

WARNING: Do not use air compressor or high pressure pumps. Do not over
inflate: excessive inflation of the air chambers can cause the chamber to burst
or cause damage to the welding seams.
Deflation
Pull out the base valve from the bed (C), open the cover (B) and take out the stopper
to release air (A). Do not to puncture your Airbed. Do not force air out of the Airbed.
Allow air to escape slowly and naturally. Fold carefully and re-insert into the
package. See below illustration!
Instructions for use:
Please transport the airbed with care. Avoid abrasive contact with walls and floors
(risk of damage). Improper use (breaking or tearing the material) will result in loss of
warranty.
Repairs:
A self-adhesive repair patch is included to repair small punctures or tears. Clean the
damaged area, remove the paper from the repair patch and press the patch onto the
damaged area without creating air bubbles. For larger repairs you can buy a repair kit
for PVC inflatable items at specialist dealers.