System information

Repair Information 4-17
NOTE: Installing the processor
• Place the ZIF socket release lever to the release (up) position.
• Insert the new processor, matching the notched corner of the processor
with the pin 1 indicator on the socket.
Figure 4- 14 Inserting the processor
• Push down the lever to lock the processor to the socket.
• Place the processor heat sink fan over the processor.
• Insert one side of fan brace onto the ZIF socket
• Secure by latching the other side to the ZIF socket.
• Reconnect the processor fan sink cable to the connector FN1 on the
system board.
Figure 4- 15 Installing the processor
Notched
corner
Pin1
indicator