User`s guide

2-38 User’s Guide
Graphics Aperture Size
This parameter specifies the system memory area reserved for
Accelerated Graphics Port (AGP). AGP is a new bus design that
enables the system to support 3D applications by speeding up the
VGA bus and increasing the bandwidth.
We recommend you to leave this parameter to
its default setting.
Plug and Play OS
When this parameter is set to
Yes
, BIOS initializes only PnP boot
devices such as SCSI cards. When set to
No
, BIOS initializes all PnP
boot and non-boot devices such as sound cards.
Set this parameter to
Yes
only if your operating
system is Windows 95 (or higher).
Reset Resource Assignments
Set this parameter to
Yes
to avoid IRQ conflict when installing
non-PnP or PnP ISA cards. This clears all resource assignments and
allows BIOS to reassign resources to all installed PnP devices the next
time the system boots. After clearing the resource data, the
parameter resets to
No
.
Refer to section 1.10.2 for instructions on installing and configuring
ISA cards.