User`s guide

2-28 User’s Guide
2.9 System Security
The Setup program has a number of security features to prevent
unauthorized access to the system and its data.
The following screen appears if you select System Security from the
main menu:
System Security Page 1/1
Setup Password ................. [ None ]
Power-on Password .............. [ None ]
Operation Mode ............... [ Normal ]
Disk Drive Control
Floppy Drive ................. [ Normal ]
Hard Disk Drive .............. [ Normal ]
↑↓ = Move Highlight Bar F1 = Help
Esc = Exit → ← = Change Setting,
2.9.1 Setup Password
The Setup Password prevents unauthorized access to the BIOS utility.
Setting a Password
1. Make sure that switch 1 of SW1 is set to
On
(bypass password).
You cannot enter the BIOS utility if a Setup
password does not exist and switch 1 of SW1
is set to
Off
(password check enabled).
By default, switch 1 of SW1 is set to
On
(bypass password).