User`s guide

BIOS Utility 2-23
SLEEP MODE
This parameter lets you specify the power-saving mode that the
system will enter after a specified period of inactivity. The options are
Standby
or
Suspend
mode.
This parameter becomes configurable only if the System Sleep Timer
is enabled. Any keyboard or mouse action, or any enabled monitored
activity occurring through the IRQ channels resumes system
operation.
2.6.2 Power Switch < 4 sec.
When set to
Power Off,
the system automatically turns off when the
power switch is pressed. When set to
Suspend
, the system enters the
suspend mode.
2.6.3 System Wake-Up Event
This parameter lets you specify the activity that will resume the system
to normal operation.
Modem Ring Indicator
When
Enabled
, any fax/modem activity wakes the system from Sleep
mode.
2.6.4 QuickStart State Timer
This parameter lets you set the time before the QuickStart turns off the
hard disk. You may select
2
,
10
, or
15
seconds.