User`s guide

BIOS Utility 2-21
2.6 Power Management
The Power Management menu lets you configure the system power-
management feature.
The following screen shows the Power Management parameters and
their default settings:
Power Management Page 1/1
Power Management Mode .............. [Enabled ]
Power Saving Operation Mode ......... [QuickStart]
IDE Hard Disk Standby Timer ..... [10] Minute(s)
System Sleep Timer .............. [--] Minute(s)
Sleep Mode .................... [------]
Power Switch < 4 Sec. ............... [Suspend ]
System Wake-Up Event
Modem Ring Indicator .............. [Enabled ]
QuickStart State Timer .............. [Off]
↑↓ = Move Highlight Bar F1 = Help
Esc = Exit → ← = Change Setting,
2.6.1 Power Management Mode
This parameter allows you to reduce power consumption. When this
parameter is set to
Enabled
, you can configure the IDE hard disk and
system timers. Setting it to
Disabled
deactivates the
power-management feature and its timers.