User`s guide

BIOS Utility 2-19
ECP DMA Channel
This item becomes active only if you select
Extended Capabilities
Port (ECP)
as the operation mode. It allows you to assign DMA
channel 1 or DMA channel 3 for the ECP parallel port function (as
required in Windows 95).
2.5.3 Onboard Device Settings
The Onboard Device Settings menu allows you to configure the device
controllers available onboard. Selecting this option from the Onboard
Peripherals menu displays the following screen:
Onboard Device Settings Page 1/1
Floppy Disk Controller ............. [Enabled ]
IDE Controller ..................... [Both ]
PS/2 Mouse Controller .............. [Enabled ]
USB Host Controller ................ [Enabled ]
USB Legacy Mode .................. [Disabled]
Onboard Audio Chip ................. [Enabled ]
↑↓
= Move Highlight Bar F1 = Help
Esc = Exit
→ ←
= Change Setting,
Floppy Disk Controller
This parameter lets you enable or disable the onboard floppy disk
controller.