User`s guide

2-16 User’s Guide
CD-ROM DRIVE DMA MODE
Set this parameter to
Enabled
to enable the DMA mode for the CD-
ROM drive. This improves the system performance since it allows
direct memory access to the CD-ROM. To deactivate the function, set
the parameter to
Disabled
.
This parameter appears only when you are in the Advanced Level.
2.5 Onboard Peripherals
The Onboard Peripherals allows you to configure the onboard devices.
Selecting this option from the main menu displays the following
screen:
Onboard Peripherals Page 1/1
Serial Port ........................[Enabled ]
Base Address .....................[2F8h]
IRQ ..............................[ 3 ]
Parallel Port .......................[Enabled ]
Base Address .....................[378h]
IRQ ..............................[ 7 ]
Operation Mode ...................[EPP]
ECP DMA Channel ................[ - ]
•
Onboard Device Settings
↑↓
= Move Highlight Bar F1 = Help
Esc = Exit
→ ←
= Change Setting,
2.5.1 Serial Port
This parameter allows you to enable or disable the serial port.