User`s guide

2-10 User’s Guide
2.4 Disk Drives
Select Disk Drives from the main menu to configure the drives
installed in your system.
The following screen shows the Disk Drives menu:
Disk Drives Page 1/1
Floppy Drive A ........... [xx-MB xx-inch]
Floppy Drive B ........... [xx-MB xx-inch]
LS-120 drive as ........... [ Normal ]
•
IDE Primary Channel Master
•
IDE Primary Channel Slave
•
IDE Secondary Channel Master
•
IDE Secondary Channel Slave
↑↓ = Move Highlight Bar F1 = Help
Esc = Exit → ← = Change Setting,
2.4.1 Floppy Drives
To enter the configuration value for the first floppy drive (drive A),
highlight the Floppy Drive A parameter. Press
or key to view
the options and select the appropriate value.
Possible settings for the Floppy Drive parameters are:
•
[ None ]
•
[360 KB, 5.25-inch]
•
[1.2 MB, 5.25-inch]
•
[720 KB, 3.5-inch]
•
[1.44 MB, 3.5-inch]
•
[2.88 MB, 3.5-inch]