(QKDQFHG 9 3HQWLXP 3&, 6\VWHP User’s Guide
&RS\ULJKW Copyright 1995 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
,03257$17 6$)(7< ,16758&7,216 1. Read these instructions carefully. future reference. Save these instructions for 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6.
9. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. 10. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed 15 amperes. 11.
14. Replace battery with the same type as the product's battery we recommend. Use of another battery may present a risk of fire or explosion. Refer battery replacement to a qualified serviceman. 15. Warning! Battery may explode if not handled properly. Do not recharge, disassemble or dispose of in fire. Keep away from children and dispose of used battery promptly. 16. Use only the proper type of power supply cord set (provided in your keyboard/manual accessories box) for this unit.
)&& &ODVV % 5DGLR )UHTXHQF\ ,QWHUIHUHQFH 6WDWHPHQW Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
$ERXW WKLV 0DQXDO Purpose This user’s guide gives you all the information you need to operate the system properly. Manual Structure This user’s guide consists of two chapters as follows: Chapter 1 System Board This chapter describes the system board and all its major components. It contains the system board layout, jumper settings, cache and memory configurations, and other internal devices.
Conventions The following conventions are used in this manual: Text entered by user Represents text input by the user. DHV Denotes actual messages that appear onscreen. Screen messages , , , etc. Represent the actual keys that you have to press on the keyboard. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
7DEOH RI &RQWHQWV Chapter 1 System Board 1.1 System Board Layout .................................................1-2 1.2 ESD Precautions ........................................................1-4 1.3 Pre-installation Instructions.........................................1-4 1.4 Installing a CPU ..........................................................1-5 1.4.1 Installing an OverDrive CPU.....................1-6 1.5 Post-installation Instructions .......................................1-7 1.
2.3 2.4 2.5 x 2.2.5 Math Coprocessor .................................... 2-13 2.2.6 Video Display ............................................ 2-13 2.2.7 Communication Status.............................. 2-14 2.2.8 Enhanced IDE Features ........................... 2-14 2.2.9 Num Lock After Boot................................. 2-15 2.2.10 Memory Test............................................. 2-15 2.2.11 Large Memory Support Mode ................... 2-16 2.2.
2.6 2.7 2.5.3 I/O Region .................................................2-27 2.5.4 Local Memory Region................................2-28 Power Saving Configuration .....................................2-28 2.6.1 Power Management Mode ........................2-28 2.6.2 System Wakeup Events ............................2-29 System Security Setup .............................................2-30 2.7.1 Disk Drive Control......................................2-31 2.7.
List of Figures 1-1 System Board Layout ................................................. 1-3 1-2 Installing a 3.3V Intel Pentium CPU ........................... 1-5 1-3 Installing an Upgrade CPU......................................... 1-7 1-4 Jumper Locations....................................................... 1-8 1-5 Installing a SIMM...................................................... 1-12 1-6 Removing a SIMM....................................................
