User Manual

Blue Lighe OFF
100
EN-12
Adjusting the OSD settings
--------------------------------------------------------------------
Note: The following content is for general reference only. Actual
product specifications may vary.
The
OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD position and general settings. For advanced settings,
please refer to following page:
Adjusting the picture quality
1Press the MENU key to bring up the OSD.
2Using the
/ keys, select Picture from the OSD. Then navigate to
the picture element you wish to adjust.
3Use the / keys to adjust the sliding scales.
4 ThePicturemenucanbeusedtoadjusttheBule light Brightness,Contrast,
ColourTemp,6-axis Saturation, 6-axis Hue and other image-related qualities.
5 6‐axis Saturate: Adjust saturation of red, green, blue, yellow, magenta and
cyan6‐axisHue:Adjusthueforred,green,blue,yellow,magentaandcyan.
6
 Super Sharpness technology can simulate high-resolution images by boosting  
the pixel density of the original source. It can make the image more sharper
and clear.