User Manual
Table Of Contents
- Information for your safety and comfort
- Safety instructions
- Special notes on LCD monitors
- Cleaning your monitor
- Accessibility
- Safe listening
- Warnings
- Using electrical power
- Product servicing
- Potentially explosive environments
- Additional safety information
- IT Equipment Recycling Information
- Disposal instructions
- LCD pixel statement
- Tips and information for comfortable use
- Finding your comfort zone
- Taking care of your vision
- Developing good work habits
- Federal Communications Commission
- Supplier's Declaration of Conformity
- Unpacking
- SCREEN POSITION ADJUSTMENT
- Connecting the adapter and AC Power cord
- Power saving
- Standard timing table
- Installation
- Troubleshooting
English
Audio
Mode - Stardard
70
Picture
Volume
Enter
Move
Off
Mute
Color
OSD
System
Save Sengs to...
Audio
Gaming
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:To choose mute on/off .
Gaming
Mode - User
Picture
Color
Over Drive
Normal
On
AMD FreeSync Premium
Off
VRB
Enter
Move
Off
Aim Point
OSD
System
Save Sengs to...
Audio
Gaming
OffRefresh Rate Num
Off
Ultra-Low Latency
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Over Drive: Select Off, Normal, or Extreme.
5. AMD FreeSync Premium: To control support AMD FreeSync Premium or not, default is
On.
---------------------------------------------------------------------------------------------------------
Note:
1. If AMD FreeSync Premium is “ON”, then the Over Drive selection is set to
“Normal” automatically.
2. If AMD FreeSync Premium is “OFF”, then the user can set Over Drive to
either one of the three settings including: (a) Extreme (b) Normal (c) Off.