User Manual
Table Of Contents
- Information for your safety and comfort
- Safety instructions
- Unpacking
- SCREEN POSITION ADJUSTMENT
- Standard timing table
- Installation
- User Controls
- Troubleshooting
English
15
7. Deep Sleep: When Deep sleep is set to on and no signal, the monitor will go to sleep
mode after 15 minutes,When Deep sleep is set to off and no signal, the monitor will not
go to sleep mode.
8. Quick start mode setting.
9. Power-off USB charge: Turn On or Off. On: DC off/Saving mode can to electrify for
USB port. Off: DC off/Saving mode can't to electrify for USB port.
Troubleshooting
Before sending your LCD monitor for servicing, please check the troubleshooting list below
to see if you can self-diagnose the problem.
HDMI/DP Mode (Optional)
Problem LED status Remedy
No picture visible Blue Using the OSD menu, adjust brightness and
contrast to maximum or reset to their default
setting.
Off Check the power switch.
Check if the AC power cord is properly
connected to the monitor.
Amber Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched on
and in power saving/standby mode.
Regulatory Compliance
R33037
RoHS
217186
60950-1