Quick Start Guide

ManualsBrandsAcer ManualsComputer MonitorsPredator XB273GXbmiiprzx LED monitor - Full HD (1080p) - 27" - HDR

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

7. In order to prevent damage to the LCD panel, do not place the monitor face down on a surface.

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the HDMI (optional) and /or DP (optional) input socket of the monitor, and the HDMI

(optional) and /or DP (optional) output socket of the graphics card on the computer.

3. Connect the USB Cable(Optional)

Connect the USB 3.0 cable to port for fast charge.

Connect the USB 3.0 cable to port.

4. Insert the monitor power cable into the power port at the back of the monitor.

5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

HDMI

USB

fast charge

-suppor

B3.0 port

ting

USB3.0 port

Note: Audio output is only for audio output model. Please check user manual for more instruction.

Summary of content (4 pages)

PAGE 1
Acer LCD Monitor Quick Start Guide (QSG) Please read the following instructions carefully. 1. 2. 3. 4. 5. 6. 7. To clean the LCD monitor screen: • Turn off the LCD monitor and unplug the power cord. • Spray a non-solvent cleaning solution onto a rag and clean the screen gently. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
PAGE 2
English 1 2 3 4 5 External controls 1 Power button 2 Function key / 3 Function key / 4 Function key /X 5 Function key / Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode. a. Press to view Main page. Press again to enter hotkey1 function. b. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults. a. Press to view Main page.
PAGE 3
Regulations and safety notices This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
English SPECIFICATION LCD Panel Driving system Size Pixel pitch Brightness Contrast Viewable angle (Typical) Response time Panel Type H-Frequency V-Frequency TFT Color LCD 27 "W (69cm) 0.311mm(H) x 0.311mm(V) 400cd/m2(Typical) 1,000:1(native) 178° (H) 178° (V) (CR≥10) Input Video Signal 4ms (GTG) In-Plane Switching HDMI:30-90KHz, DP:166KHz-166KHz HDMI: 24-60Hz, DP:1-144Hz 16.7M Colors 300MHz(HDMI)/350MHz(DP) 1920x1080 @144Hz VESA DDCCI/DDC2B A 43 (kWh) (for HDMI-input Model) 28W(typ.) 0.5W(typ.) 0.