Manual

EN-15
Adjusting miscellaneous settings
1. Press the MENU key to bring up the OSD.
2. Using the /  keys, select Setting from the OSD, then navigate the
setting you want to adjust.
3. The setting menu can be used to adjust the screen Menu Language and
other important settings, including Input and OD level.
4. Select PIP to adjust picture-in-picture settings. The PIP signal source needs
to be selected manually. The table below shows the active input
combinations for PIP.
5. When using PIP/PBP, "Wide mode", "6-axis Saturate", "6-axis Hue",
"ACM", "Gamma", "sRGB", and "Super Sharpness" will be enabled for
the main source display.
6. "Wide mode" is not supported when using PBP function.
PIP On & Input Status
PIP
Main
DVI HDMI DP Mini-DP
DVI O O O O
HDMI O O O O
DP O O O X
Mini-DP O O X O
X: Does not support PIP function in this combination