User Manual

Audio
Mode - Stardard
70
Picture
Volume
X
Enter
Move
Off
Mute
Color
OSD
System
Save Sengs to...
Audio
Pertormance
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:To choose mute on/off .
Performance
Mode - Standard
Picture
Color
Over Drive
Normal
On
AMD FreeSync
Enter
Move
Exit
Off
Refresh Rate Num
OSD
System
Save Sengs to...
Audio
Pertormance
X
Off
VRB
On
Ultra-Low Latency
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Over Drive: Select Off, Normal or Extreme.
5. AMD FreeSync: To control support AMD FreeSync or not, default is On.
-----------------------------------------------------------------------------------------------------------
Note:
If AMD FreeSync is “ON”, then the Over Drive selection is set to “Normal”
automatically.
If AMD FreeSync is “OFF”, then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
6. Refresh rate num: Display the panel’s current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note:
If AMD FreeSync set "On" you can see the V Frequency to changes in the
OSD.