User Manual

BM270 User Guide English 16
Note:
Function item is gray out and parameters are xed not open to modify.
(EBU / DCI / SMPT-C) and modes = "standard" are shared parameter values, that
can be adjusted and saved.
1. CIE 1931 positive and negative error of 0.03, ("HDR" according to current
Panel to ne-tune).
2 N/A means to follow the current parameter value (Ex. Blue Light parameter
value).
3 When select color space (AdobeRGB, Rec.709, HDR), the mode (AdobeRGB,
Rec.709, HDR) effect is turned on at the same time.
4 When any mode (User/Standard/ECO/Movie/Graphic) is selected, the color
space is auto set to Standard.
5 When the Color Space is not "Standard", if to adjust the parameter is be
saved the Modes will Not jump to User mode.
6 6-axis (Hue & Saturate) and (Grayscale mode) are Gray out can't adjustment,
except Standard.
• Grayscale Mode: Select garyscale mode “On” or “Off”.
On: Color only black and white effect.
Off: Normal color effect.
• 6-axis Hue: Adjust the Red Hue, Green Hue, Blue Hue, Yellow Hue, Magenta Hue , Cyan
Hue or Reset.