User Manual

16
Product information
1.
Press th
e MENU
key to open the OSD.
2.
Toggle the joystick to the up or down to select "Information" from the
OSD. Then toggle to the right to navigate to the element you wish to
adjust and press the joystick to enter it.
3.
Reset: Resets all settings to the factory defaults.
4.
Toggle to the left or right to adjust the sliding scales.
5.
Input: Select the source from DVI or HDMI or DP.
6.
Auto Source: Automatically searches for available input sources.
7.
Wide mode: You can select which screen aspect you are using. The
options are Full, Aspect，1：1.
8.
Hotkey Assigment ：Select
the function of shortcut key 1(Modes,
Brightness, Input,Gamma, Contrast, Blue Light, Over Drive) and
shortcut keys 2(Modes, Brightness,Input, Gamma, Contrast, Blue
Light, Over Drive)
9.
DDC/CI: Allows the monitor settings to be set through the software on
the PC.
10.
HDMI Black Level: You can select the level of blackness under
HDMI
source. The options are Normal and Low.
11.
Quick Start Mode: Enable monitor rapidly.
Note: DDC/CI, short for Display Data
Channel/Command Interface,
which allows monitor controls to be sent via software.
3.
Toggle the joystick to the up or down to select System from the OSD.
Then toggle to the right to navigate to the element you wish to
adjust and press the joystick to enter it.