User Manual

12
The Function page
Open the Function page to adjust the functions
, settings which you want using
the
arrows.
When
y
ou
are done, toggle the joystick to the left or right to go
back one level
Adjusting the Picture
1.
Press the MENU key to bring up the OSD.
2.
Toggle the joystick to the up or down to select Picture from the
OSD.Then toggle to the right to navigate to the element you wish to
adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
The Picture menu can be used to adjust the Brightness, Contrast, Black
Boost, Blue Light, ACM, and Super Sharpness, Auto Config, H. Position,
V. Position, Focus and Clock.
5.
Brightness: Adjust the brightness from 0 to 100.
6.
Contrast: adjust the contrast from 0 to 100.
7.
Black Boost: This boosts the amplitude of the dark color levels of the
display–
blacks will be less black. The higher the level, the higher the
boost.
Note: Adjusts the balance between light and dark shades.
Note: Sets the degree of difference between light and dark areas.