User Manual

English
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Performance from the OSD.Then toggle
to the right to navigate to the element you wish to adjust and press the joystick to enter
it.
3. Toggle to the left or right to adjust the sliding scales.
4. OD: Select O󰀨, Normal, or Extreme.
5. AMD FreeSync : To control support AMD FreeSync or not, default is On..
---------------------------------------------------------------------------------------------------------
Note:
Only in the Support AMD FreeSync environment the control the AMD
FreeSync (On/O󰀨) e󰀨ect, such as in NVIDIA or Intel graphic card, Non-AMD
FreeSync Environment no e󰀨ect.
6. VRB: To choose whether to support dynamic picture more clean control, default is O󰀨.
---------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP mode is not support VRB.
2. HDR setting: "Auto" is not support VRB.
3. VRB set "On", when to turn on AMD FreeSync, will auto set VRB is "O󰀨".
4. VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto
set VRB is "O󰀨".
5. VRB function does not a󰀨ect the (Logo, Aim Point, Message and Input Icon)
brightness.
6. VRB setting "On", when detection of Input Timing <75Hz, will auto o󰀨 the
VRB and gray out to disable.
7. VRB = (Normal or Extreme), because the IC control dynamic picture is
cleaner, so the overall Brightness will be dark, "Extreme" will be darker than
“Normal”.
7. Aim point: Show an Aim point on the screen for shooting games.
OSD
Mode - User
120
English
System
OSD Timeout
Picture
Color
Language
Audio
OSD
Off
Off
Transparency
Off
OSD Lock
Refresh rate num
Save seng to...
Enter
Move
X
Performance
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.