Specifications

PAGE
9.9
RS232
The base type RS232 supports several TelemetryTypes:
GSM: Gsm based data modems;
SSR24: Spread spectrum 2.4 or 0.9 GHz in switched mode;
RS232: Direct cable connection.
The base type RS232 supports several TelemetryTypes:
The configuration of each type is described in the telemetry handbook.
SSR24 : Appendix F;
GSM : Appendix G; (not included)
RS232 : Appendix M;
Databases structure
Database scada_data.mdb
General settings:
WindowStart, WindowStop: are used to define an activity time
window for the telemetry: If Scada.exe has to share the telemetry
with another application is possible to define a time window, for
instance between 11:00:00 and 16:00:00.
Scada.exe will use the telemetry system only during this interval.
CommTimeOut: Is a TimeOut interval, expressed in milliSeconds.
The communications can suffer of latency times (as for example a
Moxa device connected via a IEEE802.xx network, or via an ADSL
connection). By setting a proper value to CommTimeOut can solve
the problems due to long latency times.
WEST Systems
www.westsystems.com
Continuous monitoring device handbook Release 10.0 November 2007
WEST Systems
WEST Systems
www.westsystems.com
Continuous monitoring device handbook
WEST Systems
Release 10.0 November 2007