Specifications

WEST Systems
PAGE
7.5
WEST Systems
www.westsystems.com
Continuous monitoring device handbook
pin-007
RS232 CH2CH3 CH1 CH0
Power APump
BatteryRS485
www.westsystems.com
ON +12 +24
WEST
POWER
POWER ON
PULL AND SWITCH
POWER OFF
CPU
RUN
WEST
MMC-SD
CPU
P
1
P
2
AWM3300V
BA
PRESSURE TRANSMITTER
EXT.TRIG
AGND
GND
SUPPLY
VOUT
MODEL PTB100A
SERIAL NO R47xxxxx
RANGE 800-1060 hPa
OUTPUT 0-5 VDC
SUPPLY 10~30VDC
Station status
Running FluxStation
time (hh:mm)
8:00 9:00 10:00 11:00 12:00
Warm UP time
Pump ON
Line Cleaning time Close acc.chamber time Open acc.chamber time
nd
2 Line Cleaning time
Pump OFF
Flux record
See next pages
Radio OFFRadio ON
The station has two working
states:
1) StandBy: the time between the
analisys cicles;
2) Analisys cicle (Yellow boxes in
the drawings).
CPU RUN Led light
On light
+12V Light
+24V Light
During the stand-by state the CPU RUN led light, on the CPU board, flashes once
per second and the ON light on the Power board is solid ON.
While the analisys cicle is running the CPU RUN led light, on the CPU board,
flashes once per second and the ON light on the Power board is solid ON. The
+12V and +24V led light are solid ON (or OFF) depending on the phase of the
analisys.
Stand-by state
Analisys running state
Release 10.0 November 2007
Release 10.0 November 2007